Email senden   Tel. 0049 681 5898 564   Mein Konto  Versandkosten   Einkaufswagen 0,00


 Pull Focus
Artikel bestellen

Rainger FX

Pull Focus

Art.Nr. 4047

€ 289,00

inkl. ges. MwSt., zzgl. Versandkosten


Versand Inland (Germany) € 5,90
Versandkosten international

Auf Lager


Einkaufswagen
Herstellerinformation
Allgemeine Sicherheitshinweise -Lesen Sie vor der Inbetriebnahme des Geräts die Bedienungsanleitung sorgfältig durch -Verwenden Sie eine für das Gerät geeignete Stromversorgung mit einzelgalvanischer Trennung -Bewahren Sie die Bedienungsanleitung für das Gerät sorgfältig auf -Verwenden Sie das Gerät nur für den dafür vorgesehenen Zweck -Das Gerät darf auf keinen Fall Wasser, Feuchtigkeit und extremen Temperaturen ausgesetzt werden -Drehen Sie alle Regler am Gerät vor der Inbetriebnahme auf die jeweilige Minimaleinstellung -Bewahren Sie das Gerät außerhalb der Reichweite von Kindern auf Elektrische Sicherheit -Vergewissern Sie sich, dass das Gerät für die Spannung in Ihrem Stromnetz ausgelegt ist -Verwenden Sie entweder das mitgelieferte Netzteil oder eine gleichwertige, von Fachleuten empfohlene Stromversorgung mit einzelgalvanischer Trennung -Bei längerer Nichtbenutzung sollte das Gerät von der Stromzufuhr getrennt werden -Bei Beschädigungen des Netzkabel ist von einer Benutzung des Gerätes abzusehen -Reparaturen am Netzkabel, der Stromzufuhr oder dem Gerät selbst dürfen ausschließlich von geschultem Fachpersonal durchgeführt werden -Sollte das Gerät mit Flüssigkeiten in Kontakt gekommen sein, besteht das Risiko eines elektrischen Schlages Hinweise zur Reparatur -Reparaturen dürfen ausschließlich von qualifiziertem Fachpersonal durchgeführt werden -Selbständiges Öffnen oder der Versuch einer Reparatur des Geräts führt kann eventuell zu schweren Verletzungen oder Schäden am Gerät führen und hat zur Folge, dass die Garantieleistung erlischt -Wenden Sie sich bei Funktionsstörungen oder Defekten an einen autorisierten Service-Techniker oder an den Verkäufer Warnhinweise -Öffnen Sie das Gerät nicht. Es enthält keine vom Benutzer zu wartenden Teile -Vorhandene Lüftungsschlitze am Gerät dürfen nicht blockiert sein, da ansonsten eine Überhitzung des Geräts und etwaige Folgeschäden drohen -Verwenden Sie das Gerät nicht in der Nähe von leicht entflammbaren Materialien oder Flüssigkeiten -Vermeiden Sie Schäden durch Gewitter oder etwaiger Über- bzw. Unterspannung des Stromnetzes, indem Sie das Gerät von der Stromzufuhr trennen -Das Gerät sollte nicht direkter Sonneneinstrahlung oder anderen Wärmequellen ausgesetzt werden -Stress und Hektik bestimmen unseren Lebensalltag. Sollten Sie einmal durch das Lesen von Gebrauchsanweisungen, Verbraucherhinweisen und EU-Richtlinien gestresst sein, versuchen Sie, durch einen längeren Aufenthalt in der Natur neue Kraft zu tanken. Empfehlung: Waldspaziergang, Sonnenbad, Urlaub -Lesen Sie Aphorismen von Arthur Schopenhauer und sinnieren Sie darüber General safety instructions -Read the operating instructions carefully before using the device -Use a power supply with single isolated connections suitable for the device -Keep the operating instructions for the device carefully -Only use the device for its intended purpose -The device must not be exposed to water, moisture or extreme temperatures under any circumstances -Turn all controls on the device to the minimum setting before using it -Keep the device out of the reach of children Electrical safety -Make sure that the device is designed for the voltage in your power supply -Use either the included power supply or a power supply with single isolated connections recommended by product specialists -If the device is not used for a longer period of time, it should be disconnected from the power supply -If the power cable is damaged, do not use the device -Repairs of the power supply or the device itself should only be carried out by specialists -If the device has come into contact with liquids, there is a risk of electric shock Notes on repairs -Repairs must be carried out by qualified personnel -Opening the device by yourself or attempting to repair it may result in serious injuries or damage to the device and will void any warranty claims -In case of malfunctions or defects, contact an authorized service technician or the seller Warnings -Do not open the device. It does not contain any parts that can be serviced by the user -Existing ventilation slots on the device must never be blocked due to risk of overheating and damage -Do not use the device near easily flammable materials or liquids -Attention of thunder and lightning: Avoid damaging the device by means of voltage irregularities in the power grid by disconnecting the device from the power supply -The device should not be exposed to direct sunlight or other heat sources -Should you ever find yourself stressed by reading instructions for use, consumer information and EU guidelines, try to recharge your batteries by spending some time in nature. We recommend: A walk in the park, a step in the dark – try getting away by escaping today -Remember: When you’re alone and life is making you lonely you can always go downtown -And finally: Wake up you sleepy head. Put on your shoes, shake up your bed Importiert von / Imported by: Cotton Musical Supply Vordergasse 15 35510 Butzbach Germany info@cms-music.de www.cms-music.net Hersteller / Manufacturer: A26 The Collective Nash House Old Oak Lane London NW10 6FF UK https://www.raingerfx.com/

Rainger FX Pull Focus

Pull Focus The Pull Focus is a high gain distortion pedal, with either a reverb or chorus effect fading in after a short while. The distortion is all analog, the reverb, chorus and the fade-in are all digital. Plus there’s a noise gate too, which unobtrusively keeps the pedal silent when you’re not playing. It’s very intuitive and fun to use! It’s a multi-effects pedal, of a very particular kind…. The distortion is made from our favourite overdrive circuit (from Reverb-X, El Distorto etc), but going into the back end of the Tonebender circuit that we made for Colorsound - when we did our collaboration on their Freakenbender pedal a while back. We worked hard to make it as balanced, versatile, powerful and silent as possible, ending up with an incredibly satisfying sound. Full-range, not very scooped, tonally. There are ‘volume’, ‘tone’, and ‘gain’ controls - the gain goes from a loose, mild overdrive up to a massive chunky sound - through to a tiny hint of sag. Fade In Developed originally for our Break Box pedal, the Pull Focus has the same delayed fade-in for the chorus or reverb effect - but with an adjustable fade-in ramp; with the ‘ramp’ knob fully CCW the effect is in all the time, but as you start to turn it the effect takes a short while (less than a second?) to appear after the pick attack. As you turn it more, this delay time gradually increases - to around four seconds maximum, until at fully CW it never actually comes in at all, i.e. if you only want distortion you can turn off that effect totally. Chorus Or Reverb The chorus is deep (modulated signal equal to unmodulated), and only rate-adjustable, with a very wide range of speeds available - from the ‘effect’ knob. Great for shimmery sustaining chords, or a double-tracking effect. It goes from a very slow twist (think Jane’s Addiction/Smashing Pumpkins?) through a mid-speed obvious modulation (Bowie’s ‘Lodger’?) up to a fast psychotic wobble (Devo? Spongebob/Peewee Herman??) The ‘effect’ knob is dual-purpose; press the ‘effect’ switch and the chorus sound is replaced by a spectacular digital reverb effect, which - turning the knob - goes from a subtle, small room/almost not there, right up to a hall reverb - and tons of it! So with lots of short notes (eg fast soloing) the guitar is totally dry all the time, but intense and powerfully distorted. But play a long note or chord and the reverb blooms into a huge spatial thing; all your long bent notes automatically grow into epic, swooping sounds, full of emotion and with the ambience of a big space! It’s incredibly dynamic to play through! However with the next note you play it dramatically snaps off hard - back to a totally dry distortion - close, and focussed… So the listener’s attention is drawn from up-close and in-your-face to a more distant reverbed sound - and then back; just as in film-making, a ‘pull focus’ leads the viewers attention from a face close by (a further-away face being blurred) to a face further away (the close-by one now being blurred). The Pull Focus pedal is a very ‘3D’ effect, your guitar automatically moving from near to far away in an original and exciting way. Active Sustain This fading-in of the secondary effect is actually ‘active sustain’; you feel a definite increase in your guitar signal level - as opposed to the usual dying away. On the chorus setting this feels like a churning wave coming from behind to lift you forwards. With reverb it’s a monster growing out of your guitar! There’s an on/off status LED, plus a large ‘ramp’ LED - which gives a visual indication of what’s going on sonically. There’s a ‘sens.’ switch - adjusting sensitivity of the gate and pick detection circuits - to ensure they work great whatever kind of instrument output you’re using. It’s true bypass, has custom-designed knobs, and is housed in another deeply cool Rainger FX custom enclosure. Desk-style, a slight flare to it, and symmetrical - to help all our OCD musician friends. It’s been developed from our Break Box pedal - but without the vinyl scratch, and with a reverb option. Features: -HUGE ANALOG DISTORTION SOUNDS - WITH ACTIVE SUSTAIN! -DEEP LOWS, SEARING HIGHS -REVERB OR CHORUS EFFECT FADES IN -ADJUSTABLE FADE-IN TIME -ORIGINAL AND VERY INTUITIVE -CONTROLLABLE AMOUNT OF REVERB -CHORUS SPEED ADJUSTABLE -BUILT-IN NOISE GATE -CUSTOM KNOBS AND ENCLOSURE Benötigt: 9VDC 100mA Center Negativ

Preise inkl. der gesetzlichen MwSt. Satzfehler und Irrtümer vorbehalten. Lieferung von Ware am Lager solange Vorrat reicht. Preise in Euro zzgl. Versandkosten. © Frank Post, Bruchwiesenstrasse 25, D-66111 Saarbrücken, Telefon 0049(0)681-5898564, Email info AT loopersparadise de

Page built in 0.139 Sec.