Email senden   Tel. 0049 681 5898 564   Mein Konto  Versandkosten   Einkaufswagen 0,00


 LARVA
Artikel bestellen

Beetronics FX

LARVA

Art.Nr. 4107

€ 275,00

inkl. ges. MwSt., zzgl. Versandkosten


Versand Inland (Germany) € 5,90
Versandkosten international

Auf Lager


Einkaufswagen
Herstellerinformation
English Version below. Allgemeine Sicherheitshinweise • Bevor Sie das Gerät in Betrieb nehmen drehen Sie bitte alle Regler auf Minimum bzw. auf „Null“. • Lesen Sie die Bedienungsanleitung sorgfältig durch, bevor Sie das Gerät in Betrieb nehmen. • Bewahren Sie die Bedienungsanleitung für zukünftige Referenz auf. •Verwenden Sie das Gerät nur für den vorgesehenen Zweck. • Halten Sie das Gerät von Wasser, Feuchtigkeit und extremen Temperaturen fern. • Bewahren Sie das Gerät außerhalb der Reichweite von Kindern auf. Elektrische Sicherheit • Vergewissern Sie sich, dass die Netzspannung mit den Angaben auf dem Gerät übereinstimmt. •Verwenden Sie nur das mitgelieferte Netzteil oder ein gleichwertiges, von einem Fachmann empfohlenes Netzteil. • Ziehen Sie den Netzstecker, wenn das Gerät längere Zeit nicht benutzt wird. • Schützen Sie das Netzkabel vor Beschädigungen. • Verwenden Sie das Gerät nicht, wenn das Netzkabel beschädigt ist. • Vermeiden Sie den Kontakt des Geräts mit Wasser oder anderen Flüssigkeiten, um das Risiko eines elektrischen Schlages zu minimieren. Hinweise zur Reparatur • Reparaturen dürfen nur von qualifiziertem Fachpersonal durchgeführt werden. • Versuchen Sie nicht, das Gerät selbst zu öffnen oder zu reparieren, da dies zu schweren Verletzungen oder Schäden am Gerät führen kann. • Bei Funktionsstörungen oder Defekten wenden Sie sich an einen autorisierten Service-Techniker oder an uns. info@effekt-boutique.de Warnhinweise • Öffnen Sie das Gerät nicht. Es enthält keine vom Benutzer zu wartenden Teile. • Stellen Sie sicher, dass die Lüftungsschlitze des Geräts nicht blockiert sind, um Überhitzung zu vermeiden. • Verwenden Sie das Gerät nicht in der Nähe von entflammbaren Materialien oder Flüssigkeiten. • Ziehen Sie bei Gewitter oder längeren Betriebspausen den Netzstecker, um mögliche Schäden durch Spannungsspitzen zu vermeiden. • Setzen Sie das Gerät nicht direkter Sonneneinstrahlung oder anderen Wärmequellen aus. • Essen Sie keinen gelben Schnee English General safety instructions • Before you start using the device, please turn all controls to minimum or “zero”. • Read the operating instructions carefully before using the device. • Save the instruction manual for future reference. •Use the device only for its intended purpose. • Keep the device away from water, moisture and extreme temperatures. • Keep the device out of the reach of children. Electrical safety • Make sure that the mains voltage matches the information on the device. •Use only the included power adapter or an equivalent power adapter recommended by a professional. • Unplug the device if the device is not going to be used for a long period of time. • Protect the power cord from damage. • Do not use the device if the power cord is damaged. • Avoid contact of the device with water or other liquids to minimize the risk of electric shock. Repair instructions • Repairs may only be carried out by qualified specialist personnel. • Do not attempt to open or repair the device yourself as this may result in serious injury or damage to the device. • In the event of malfunctions or defects, contact an authorized service technician or us. info@effekt-boutique.de Warnings • Do not open the device. It contains no user-serviceable parts. • Make sure the device's ventilation slots are not blocked to avoid overheating. • Do not use the device near flammable materials or liquids. • During thunderstorms or long breaks in operation, pull out the power plug to avoid possible damage caused by voltage peaks. • Do not expose the device to direct sunlight or other heat sources. • Don't eat yellow snow Hersteller / Manufacterer: Beetronics LLC 14444 Benefit Street APT 4 CA 91423 Sherman Oaks United States (+1) 323 975 71 19 contact@beetronicsfx.com www.beetronicsfx.com Imported by Face BV Hoek 76 Unit 301 2850 Boom Belgium (+32) 3 844 67 97 info@face-be.eu www.face-be.eu

Beetronics FX LARVA

LARVA MORPHING PHASER Bee ready to enter a new phase. The Morphing Phase. Meet the LARVA Morphing Phaser. A 6-stage analog phaser, vibee and preamp with morphing capabilities. At the Hive, we’ve always enjoyed approaching effects a little differently. When it comes to phasers, I’ve owned quite a few over the years, but only a small handful really stand out for me. I’m not a big fan of that cheesy, over-the-top 80s phaser sound. What I love is a thick, warm, vintage-style phaser—usually set at super slow speeds or when it’s dialed up for some psychedelic vibes at higher speeds. That’s where the Larva started. The goal was to create the warmest, best-sounding phaser we possibly could, and one that works well with any instrument—guitar, bass, keys, rhodes, or synths. Then, we combined with our ramping system, something we’ve explored with the Zombee and SeaBee. This time, though, the focus was on simplicity. We didn’t want secondary controls or menus to get in the way. So, we designed an interface that puts everything you need right up front. We created the Ramp Led indicators to make the ramping movement super clear—you can see exactly where you’re at and how it’s morphing from side to side. That whole combo turned into an intuitive, straightforward pedal that delivers beautiful, warm phase tones while also allowing for expressive, intricate movements. The effect toggle lets you choose between the phaser, Vibee, or just the preamp. Vibee is essentially the wet signal from the phaser modulation, and the phaser combines both wet and dry signals. The preamp is its own circuit before the modulation circuit and it’s always active in both the Phaser and Vibee modes, but you can dial it back to match your dry signal if you want it fully clean. It features two independent phaser settings, allowing you to create unique sounds and transitions. You can use it as a straightforward phaser, set up two different phaser presets, or morph between them for creative soundscapes. ANALOG WARMTH, MODERN FEATURES. A 6-stage analog phaser delivering unmatched warmth, paired with a simple and intuitive interface packed with modern features like tap tempo and dual morphing presets. AN OUTSTANDING PREAMP FOR EVERY INSTRUMENT. Inspired by the classic Moogerfooger line, the Larva preamp enhances phase and vibe tones with subtle warmth or bold lead power—and it’s so good, that we made it so you can use it on its own. TAKE YOUR EXPRESSION BEEYOND. At the heart of the pedal are the Ramp LEDs, letting you visualize the expression movement. With intuitive controls, creating expressive ramping movements becomes effortless. HOW TO MORPH? Set the rate and depth for Phaser 1 (left) and Phaser 2 (right). The ramp shape defines the morphing movement, and ramp time controls how fast or slow it flows. Hold the ramp footswitch, and experience expression like never beefore . Benötigt: 9VDC 100mA Center Negativ

Preise inkl. der gesetzlichen MwSt. Satzfehler und Irrtümer vorbehalten. Lieferung von Ware am Lager solange Vorrat reicht. Preise in Euro zzgl. Versandkosten. © Frank Post, Bruchwiesenstrasse 25, D-66111 Saarbrücken, Telefon 0049(0)681-5898564, Email info AT loopersparadise de

Page built in 0.140 Sec.